Laminate flooring is made to look like natural products such as wood flooring or natural stone, yet is made up of either synthetic materials (usually melamine resin) or of synthetic materials combined with natural and recycled ingredients and covered with an attached decorative applique including an aluminum oxide finish.

HG Hagesan have a fantastic range of products for Laminate flooring.  HG Laminate Wash & Shine cleans with a fresh scent and adds a shine.  In addition HG Laminate Wash and Shine also prevents a laminted floor from becoming dull.

1. Simply add 100ml to a 10litre bucket of preferably luke warm water.
2. Apply the solution sparingly using an ordinary floor cloth.  Immerse the floor cloth into the bucket of the cleaning solution and then wring out well before use.  Ensure the floor cloth is not too damp.
3. Rinse the cloth regularly in the bucket.
4. An alternative to using a floor cloth is to use a flat mopping system such as the Henry Spray Mop.  The Spray Mop has a microfibre washable head for extra cleaning power and there is no need for a bucket.
5. Once the floor has been mopped using the HG Laminate Wash & Shine there is no need to rinse or to dry.

It is important that the directions are carefully followed and the laminate floor does not get too wet as making the floor too wet can cause the joints to swell.

Laminate floors can be protected against intensive grime, staining and wear with HG Laminate Gloss Coating, which also provides a self-shining coating.

HG Laminate Gloss Coating can only be used on laminate floors with completely gued seems and not on click-laminate, veneer parquet, laminate parquet, click-parquet and other wooden floors that are not completely vrnished because moisture penetrating between the seems can cause swelling.

Alternatively, Prochem offer a range of products for the Professional to clean leather.

1. Before applying the Laminate Gloss Coating the floor should be thoroughly with HG Laminate Powerful Cleaner.  Dilute HG Laminate Powerful Cleaner with water at a ratio of 1:5.

2. Using a floor cloth, immerse the cloth in the solution and wring out well and clean the floor in the normal way, regularly rinsing the cloth in the solution.  In the case ofvery stubborn dirt, treat the floor in sections, leave the solution to penetrate for a few minutes and then wipe again.

3. Allow the floor to completely dry before applying the Gloss Coating,  The best results can be obtained by using a lint free cloth.

4. Dip the cloth in the solution and squeeze it out so it is damp… not too wet.

5. Apply the HG Laminate Gloss Coating  thinly and evenly in one direction only.  Do not rub in.  Do not treat more then 5m2 at a time.  Regularly dip the cloth in the solution and squeeze out the excess.

6. After approximately 45 minutes, the HG Laminate Gloss Coating will be dry and a second coat can be applied at right angles to the first coat.

7. After 3hours the floor can be walked on.  Avoid spilliages or heavy wear for 24 hours until the coating has completely hardened.

8. If you need to remove the HG Laminate Gloss Coating, use the HG Laminate Powerful Cleaner UNDILUTED, treating the floor in sections, ensuring not to make the floor too wet.

For day-to-day cleaning of the laminate flooring, HG Laminate Spray ideal for spot cleaning of the floor to help your laminate floor always remain in top condition.